My little journey of designing and building my very own WALL-E...
Wednesday, August 7, 2013
Almost Finished With The Head
Today, I completed the rear connector using off-the-shelf pipe connectors and tubing. I also redesigned the how everything bolts together in the rear of the head... and finally, I decided on which servos I will be using for both the eye pivot and the head pivot: TGY-5521MD. So far, it starting to look like WALL-E's head once again, but the cost is going up and up... I originally budgeted about $2,000 for this project so hopefully we can stay under budget!